The ultimate racing wheelset made of carbon for the mountains, a few
hills or in the flat.
MSRP per set
from €
2 049
from CHF
2 049
from $
2 387
from YEN
315 354
from NT$
70 683
Weight per set
from
1486
g
Brake interface
Rim Brake
Product details
Unsure what will happen on your group ride? Mountains, hills or flat
sections? Water from below, water from above? You needn't worry, the PRC
1400 SPLINE has it covered. high-end, bladed straightpull spokes and the
most reliable and light-weight freewheel system make for an efficient
ride. Offering the perfect blend of comfort, grip and lightweight in
combination with a higher volume tire, the wide and stiff full carbon
rims accelerate with the best of them. Equipped with disc brakes it will
stop on a dime all the time. So the PRC 1400 SPLINE is ready for
anything, are you?
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our inhouse developed technologies.
«The PRC 1400 SPLINE 35 really stand out. Light and stiff, their acceleration capacity is outstanding and gives me that extra kick on attacks. As a climber stability and agility are very important, not only to perform, but also for my confidence. That's what I find in my PRCs. And come on, look at them, you'll fall in love with them the very first second you ride them.»
Photo credit: Swiss Racing Academy / Merot
Just Tri
«I thought it was only celebrated for it's light weight for climbing, but I was surprised by its all-around versatility: stiff, smooth, agile and stable.»
kilian oertli
Service course strasse, swiss cycling
«The PRC 1400 SPLINE 35 is our Allround wheel. Low weight for the steepest climbs, maximum stability when starting and highest braking power for rapid descents. The choice for every type of stage profile.»
by Matt Brett
«Exceptionally good deep-section wheels that offer decent stability, good braking and plenty of reliability.»
join the community
The @lotto_soudal ladies during a great lead-out session at their training camp in Calpe. Check the video link in the bio to experience it yourself from the handlebars of @lottekopecky.
DT Swiss is proud to support the team with ARC 1100 DICUT 48 and PRC 1400 SPLINE 35 wheels motivating more women to ride bikes.
Photo credit: @facepeeters#ambitiouscyclist#competitiveedge
Inclusive
RWS Steel
Tubeless tape 21 mm
TL valve alu black 26-35 mm
Swissstop black prince
Product support
According to your selection PRC 1400 SPLINE® we found 2 models. Please use the model finder above to narrow down the models. Select the model for which you need product support.
The current DT Swiss wheels are tubeless-ready and come with mounted tubeless rim tape and corresponding valves. For conversion, you will need a tubeless-capable tire (optimal: UST) and tire sealant. You can find both at an official dealer. Our How To video will take you through step-by-step assembly.
If you have previously ridden your bike with a tube or if the tape no longer sticks properly to the rim, we recommend that you replace the rim tape as a precaution.
How to attach the tubeless rim tape:
1. Measure the inside width of the rim.
2. The tubeless rim tape should be approx. 2 mm wider than the rim and can be bought from a specialist store.
3. Apply the tubeless rim tape. Depending on the rim/tire combination, it may be helpful to apply two or three layers of tubeless rim tape to optimally seal the rim bed.
Play
Youtube not allowed
Here you can find a video on Youtube. With one click you can agree to the use of marketing cookies and watch the video. I consent to external content being displayed. This means that personal data may be transmitted to third-party platforms. You can find more information about this in our privacy policy.
Are you looking for the user manual, searching for compatible replacement parts, or do you want to know which components are installed in your product?
All this information is stored in our useful Product Support. By entering the 7-digit DT Swiss ID or scanning the corresponding QR code / dot code with your mobile camera, you can easily identify your product. Please note that the dot code can only be read with this specific scan reader.
Since 2020, all wheels and suspension products are equipped with the 7-digit DT Swiss ID. If your product does not have a DT Swiss ID, you can also identify it using the filter function or the material number. Here you can find everything about the exact positioning of the DT Swiss ID on our products.
Under Product Support, you will find exact details of all conversion options for your product (wheel, hub). First go to Product Support and select your product using the DT Swiss ID or filter. Under "Conversion" you will find the exact details for all conversion options. You will also find helpful How To videos and manuals.
The tire should be pumped in line with the manufacturer's instructions, in order to ensure optimum rolling resistance.
Note: This can vary depending on the tire manufacturer and model. The tire pressure impacts both the ride comfortability and stability of the wheel. See our tire pressure table for an overview of maximum tire pressures depending on tire and rim width.
In cycling, rim height significantly impacts the aerodynamics, maneuverability and weight of the wheel. Basically, the higher the rim, the greater the aerodynamic advantage. The lower the rim, the more agile and maneuverable the handling.
By buying a DT Swiss carbon wheel, you will benefit from the Fair Share Policy which allows you to profit from a crash replacement service for your wheels, available for 10 years after purchase.
by Matt Brett
