MSRP per set
from €
459
from CHF
459
from $
633
from YEN
70 739
from NT$
15 855
Weight per set
from
1953
g
Brake interface
Disc Brake
Product details
Often the adventure starts where the road ends. An e-gravel bike can
assist you on getting there and beyond. With the HG 1800 SPLINE wheels
you will be able to cycle there and back without concern. The robust rim
combined with reinforced components is perfectly adapted for higher
system weights (up to 140 kg), as well as for gravel riding. The inner
rim width ideally supports tires up to 50 mm wide, which will make your
gravel ride feel like a smooth promenade. The redesigned hub hides the
Ratchet LN freehub system at its core, which provides reliable power
transfer. This new wheelset is built to assist you on an extended gravel
adventure.
Hub type
370
with
Ratchet LN 18
Rim
Aluminum, Hooked / Crotchet tubeless TC
Rim height
25 mm
Spokes
DT new aero® hybrid straightp
rim
The robust, sleeved rim with an inner width of 24 mm supports tires up to 50 mm and provides riding comfort.
spokes
DT new aero® hybrid spokes are reinforced and increase the lateral and torsional stiffness of the wheel.
hub
The hub body has been adapted and redesigned to provide greater resistance to acceleration and braking forces required by e-gravel riding.
freehub system
The 370 hybrid hub has been upgraded with the Ratchet LN system, which provides a superior reliability and an increased durability due to lower peak load upon engagement.
hybrid road
Built to Assist
technology
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our inhouse developed technologies.
Often the adventure starts where the road ends. An e-gravel bike can assist you on getting there and beyond. With the HG 1800 SPLINE wheels, you will be able to cycle there and back without concern, thanks to its reinforced components
#builttoassist
Inclusive
Tubeless tape 27 mm
TL valve alu black 18-25 mm
Product support
According to your selection HG 1800 SPLINE® we found 11 models. Please use the model finder above to narrow down the models. Select the model for which you need product support.
The current DT Swiss wheels are tubeless-ready and come with mounted tubeless rim tape and corresponding valves. For conversion, you will need a tubeless-capable tire (optimal: UST) and tire sealant. You can find both at an official dealer. Our How To video will take you through step-by-step assembly.
If you have previously ridden your bike with a tube or if the tape no longer sticks properly to the rim, we recommend that you replace the rim tape as a precaution.
How to attach the tubeless rim tape:
1. Measure the inside width of the rim.
2. The tubeless rim tape should be approx. 2 mm wider than the rim and can be bought from a specialist store.
3. Apply the tubeless rim tape. Depending on the rim/tire combination, it may be helpful to apply two or three layers of tubeless rim tape to optimally seal the rim bed.
Play
Youtube not allowed
Here you can find a video on Youtube. With one click you can agree to the use of marketing cookies and watch the video. I consent to external content being displayed. This means that personal data may be transmitted to third-party platforms. You can find more information about this in our privacy policy.
Are you looking for the user manual, searching for compatible replacement parts, or do you want to know which components are installed in your product?
All this information is stored in our useful Product Support. By entering the 7-digit DT Swiss ID or scanning the corresponding QR code / dot code with your mobile camera, you can easily identify your product. Please note that the dot code can only be read with this specific scan reader.
Since 2020, all wheels and suspension products are equipped with the 7-digit DT Swiss ID. If your product does not have a DT Swiss ID, you can also identify it using the filter function or the material number. Here you can find everything about the exact positioning of the DT Swiss ID on our products.
Under Product Support, you will find exact details of all conversion options for your product (wheel, hub). First go to Product Support and select your product using the DT Swiss ID or filter. Under "Conversion" you will find the exact details for all conversion options. You will also find helpful How To videos and manuals.
The tire should be pumped in line with the manufacturer's instructions, in order to ensure optimum rolling resistance.
Note: This can vary depending on the tire manufacturer and model. The tire pressure impacts both the ride comfortability and stability of the wheel. See our tire pressure table for an overview of maximum tire pressures depending on tire and rim width.
