MSRP per set
from €
1 769
from CHF
1 769
from $
2 061
from YEN
272 277
from NT$
61 028
Weight per set
from
1691
g
Product details
These extra lightweight carbon eMTB wheels are engineered for riders
looking for outstanding agility. Thanks to the low weight carbon rims,
riders benefit from increased agility and dynamism when going uphill and
downhill, while withstanding the increased torques of eMTBs. The spokes
were designed with specific diameters to align light weight and
resistance. Inside the 240 hub, oversized bearings support the
additional loads of eMTBs. With the Ratchet EXP OS system, the rider
benefits from direct acceleration through a torque-resistant freehub
system. Each component has been designed with the specific aim of
delivering advanced agility to find flow and fun on the trails.
Hub type
240
with
Ratchet EXP OS 30
Rim
Carbon, Hookless tubeless TSS
Inner width
30 mm
Spokes
DT hybrid 4 straightpull
Carbon rims
Light yet resistant rims, a strong combination enabling a lighter riding feeling. Available in 27.5" and 29" with 30 mm internal width.
Light reinforced spokes
Designed for agility, the Hybrid spokes are composed of three different diameters (2.15/1.8/2.0) and are developed to resist higher torques.
240 LS hub
A new hub enabling greater resistance to acceleration and braking forces.
Ratchet EXP OS freehub
Equipped with larger bearings , the Ratchet EXP OS system is specified with 30 teeth that create 12 degrees of engagement.
Compatibility
The hub is compatible with all common freehub standards and can be changed easily and without tools.
hybrid mtb ls built to advance
The Hybrid MTB LS wheels are Built to Advance, featuring upgraded components specifically developed for motors with a lower average torque output, without compromising the weight and therefore the agility a lighter wheelset provides while riding.
technology
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our inhouse developed technologies.
Here you can find a video on Youtube. With one click you can agree to the use of marketing cookies and watch the video. I consent to external content being displayed. This means that personal data may be transmitted to third-party platforms. You can find more information about this in our privacy policy.
«The new HXC 1501 SPLINE ONE LS wheels are so light that you no longer notice the weight of the eMTB. In addition, they are also very suitable for smaller and larger jumps, because they bring stability in the air. These wheels make it possible to ride technical trails faster because they are precise and light, allowing you to react quickly to avoid a root or a rock.»
Inclusive
Tubeless tape 32 mm
TL valve alu black 18-25 mm
IS 6-bolt adapter MTB
Product support
According to your selection HXC 1501 SPLINE® ONE LS we found 6 models. Please use the model finder above to narrow down the models. Select the model for which you need product support.
The current DT Swiss wheels are tubeless-ready and come with mounted tubeless rim tape and corresponding valves. For conversion, you will need a tubeless-capable tire (optimal: UST) and tire sealant. You can find both at an official dealer. Our How To video will take you through step-by-step assembly.
If you have previously ridden your bike with a tube or if the tape no longer sticks properly to the rim, we recommend that you replace the rim tape as a precaution.
How to attach the tubeless rim tape:
1. Measure the inside width of the rim.
2. The tubeless rim tape should be approx. 2 mm wider than the rim and can be bought from a specialist store.
3. Apply the tubeless rim tape. Depending on the rim/tire combination, it may be helpful to apply two or three layers of tubeless rim tape to optimally seal the rim bed.
Play
Youtube not allowed
Here you can find a video on Youtube. With one click you can agree to the use of marketing cookies and watch the video. I consent to external content being displayed. This means that personal data may be transmitted to third-party platforms. You can find more information about this in our privacy policy.
Are you looking for the user manual, searching for compatible replacement parts, or do you want to know which components are installed in your product?
All this information is stored in our useful Product Support. By entering the 7-digit DT Swiss ID or scanning the corresponding QR code / dot code with your mobile camera, you can easily identify your product. Please note that the dot code can only be read with this specific scan reader.
Since 2020, all wheels and suspension products are equipped with the 7-digit DT Swiss ID. If your product does not have a DT Swiss ID, you can also identify it using the filter function or the material number. Here you can find everything about the exact positioning of the DT Swiss ID on our products.
Under Product Support, you will find exact details of all conversion options for your product (wheel, hub). First go to Product Support and select your product using the DT Swiss ID or filter. Under "Conversion" you will find the exact details for all conversion options. You will also find helpful How To videos and manuals.
The tire should be pumped in line with the manufacturer's instructions, in order to ensure optimum rolling resistance.
Note: This can vary depending on the tire manufacturer and model. The tire pressure impacts both the ride comfortability and stability of the wheel. See our tire pressure table for an overview of maximum tire pressures depending on tire and rim width.
You can buy all spare parts, conversion kits, and tools from a dealer.
You can find the right spare part or conversion kit under Product Support. First go to Product Support and select your product using the DT Swiss ID or filter. Under "Spare Parts" you will find the exact details on all the components of your product. You will also find helpful How To videos and manuals. Make a note of the material number and order the spare part from your dealer.
For dealers: Order spare parts via our distributor or directly via our B2B online shop. Prices and availability are shown directly on the B2B online shop.
By buying a DT Swiss carbon wheel, you will benefit from the Fair Share Policy which allows you to profit from a crash replacement service for your wheels, available for 10 years after purchase.
