MSRP per set
from €
849
from CHF
849
from $
1 171
from YEN
130 739
from NT$
29 303
Weight per set
from
1909
g
Product details
Increase the agility of lightweight eMTBs using this specific aluminum
wheelset. Aligned to the purpose of lightweight eMTBs, the HX 1700
SPLINE LS aim for the right balance between lightness and resistance for
more dynamic handling. The 350 hubs have been redesigned for eMTB to
offer more resistance to the acceleration and braking forces. In
addition, the spokes have been modified to increase their strength
without drastically increasing the weight. These wheels are ready to be
ridden on the fastest lines in technical sections and to carve into fast
and tight turns.
Hub type
350
with
Ratchet System 24
Rim
Aluminum, Hooked / Crotchet tubeless TC
Inner width
30 mm
Spokes
DT hybrid 3 straightpull
welded aluminum rims
A light yet resistant aluminum rim, available in 27.5" and 29" with 30 mm internal width.
Light reinforced spokes
Composed of two different diameters (2.15/2.0), the Hybrid spokes allow a balance between lightness and resistance for agile and reliable riding.
350 ls hub
A new hub shape design for greater resistance to acceleration and braking forces.
Ratchet System
Proven Ratchet System with well know reliability at a low weight.
Compatibility
The hub is compatible with all common freehub standards and can be changed easily and without tools.
hybrid mtb ls built to advance
The Hybrid MTB LS wheels are Built to Advance, featuring upgraded components specifically developed for motors with a lower average torque output, without compromising the weight and therefore the agility a lighter wheelset provides while riding.
technology
We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our inhouse developed technologies.
«The HX 1700 SPLINE LS wheels are perfectly matched to the Light Hybrid requirements. They act, by the lower weight compared to full hybrid wheels, more agile and safer compared to ordinary wheels. This balance is reflected in the performance in jumps and off-road and conveys handling like a classic enduro bike.
Technical trails turn out to be very grippy when up / downhill. This allows for precise line selection and great directional stability.»
Inclusive
Tubeless tape 32 mm
Tubeless valve MTB 32 mm
IS 6-bolt adapter MTB
Product support
According to your selection HX 1700 SPLINE® LS we found 6 models. Please use the model finder above to narrow down the models. Select the model for which you need product support.
The current DT Swiss wheels are tubeless-ready and come with mounted tubeless rim tape and corresponding valves. For conversion, you will need a tubeless-capable tire (optimal: UST) and tire sealant. You can find both at an official dealer. Our How To video will take you through step-by-step assembly.
If you have previously ridden your bike with a tube or if the tape no longer sticks properly to the rim, we recommend that you replace the rim tape as a precaution.
How to attach the tubeless rim tape:
1. Measure the inside width of the rim.
2. The tubeless rim tape should be approx. 2 mm wider than the rim and can be bought from a specialist store.
3. Apply the tubeless rim tape. Depending on the rim/tire combination, it may be helpful to apply two or three layers of tubeless rim tape to optimally seal the rim bed.
Play
Youtube not allowed
Here you can find a video on Youtube. With one click you can agree to the use of marketing cookies and watch the video. I consent to external content being displayed. This means that personal data may be transmitted to third-party platforms. You can find more information about this in our privacy policy.
Are you looking for the user manual, searching for compatible replacement parts, or do you want to know which components are installed in your product?
All this information is stored in our useful Product Support. By entering the 7-digit DT Swiss ID or scanning the corresponding QR code / dot code with your mobile camera, you can easily identify your product. Please note that the dot code can only be read with this specific scan reader.
Since 2020, all wheels and suspension products are equipped with the 7-digit DT Swiss ID. If your product does not have a DT Swiss ID, you can also identify it using the filter function or the material number. Here you can find everything about the exact positioning of the DT Swiss ID on our products.
Under Product Support, you will find exact details of all conversion options for your product (wheel, hub). First go to Product Support and select your product using the DT Swiss ID or filter. Under "Conversion" you will find the exact details for all conversion options. You will also find helpful How To videos and manuals.
The tire should be pumped in line with the manufacturer's instructions, in order to ensure optimum rolling resistance.
Note: This can vary depending on the tire manufacturer and model. The tire pressure impacts both the ride comfortability and stability of the wheel. See our tire pressure table for an overview of maximum tire pressures depending on tire and rim width.
You can buy all spare parts, conversion kits, and tools from a dealer.
You can find the right spare part or conversion kit under Product Support. First go to Product Support and select your product using the DT Swiss ID or filter. Under "Spare Parts" you will find the exact details on all the components of your product. You will also find helpful How To videos and manuals. Make a note of the material number and order the spare part from your dealer.
For dealers: Order spare parts via our distributor or directly via our B2B online shop. Prices and availability are shown directly on the B2B online shop.
